Instructions on Using the Equipment Limitation Stickers
Please ensure that equipment is DRY and CLEAN BEFORE you apply the stickers to any item of equipment.
Please ensure that stickers are placed according to the instructions below. Keep in mind that all stickers should be clearly visible to the Equipment Inspection Team.
HULL – Place on the port side of the stern, just below the sheerline.
CENTERBOARD – Place on the top of the centerboard so that it is visible when lifted, on port side.
RUDDER – Place at top of the rudder, port side
MAST – Place on the port side of the mast just above the gooseneck fitting. Ensure sticker is clear of any rigging or attachments.
BOOM – Place on front end of boom, port side, near gooseneck
SAILS – All sails shall be stamped by an inspector in the area designated.
CERTIFICATION DOCUMENTATION –
PLEASE MAKE SURE YOU HAVE COMPLETED THE ONLINE EQUIPMENT REGISTRATION AND PRESENT YOUR CERTIFICATE TO THE MEASUREMENT DESK.
NOTE
ALL UNUSED STICKERS SHALL BE RETURNED TO THE MEASUREMENT DESK.
By placing stickers on the boat.
- I understand that these items may not be substituted at any time during the event without prior written consent of the Event Jury.
- It is my sole responsibility to ensure that the equipment I use for this event shall comply with the class rules at all times and that the equipment may be checked for class rule compliance at any time during the event.